1.
Since machines with steam require a continuous power source in order to heat the water, the CrossWave HydroSteam will be _____.
2.
When using a CrossWave to wash rugs, a consumer will need to pull the ______ in order to make a wet pass against the surface.
3.
The spray tips on the foot of the machine will push the solution through the clear ______in order to direct it onto the floor.
4.
This type of vacuum will use rotating discs with mop pads in order to wash and polish hard floors.
5.
Certain CrossWave models that have light displays may show certain _____ codes to indicate a specific issue with the machine.
6.
Specific models are able to be monitored or controlled through the BISSELL ______ app.
7.
As an additional feature, some CrossWave models will include a self-________ cycle so the machine can clean out the brush and foot automatically.
8.
CrossWave models are our line of ___-dry vacuums.
9.
For CrossWave models, the brush roll is normally expected to be replaced after ___ hours of use.
10.
_________ mode will normally dispense less water than area rug mode.
