1.
One of Bontrager's image evaluation criteria.
2.
Placing the hand in the __ _____ will place the thumb at a 45 degree angle
3.
One of Bontrager's image evaluation criteria.
4.
On a properly positioned oblique hand, proper obliquity is achieved when there is some overlap of the ___ ___.
5.
When there is a loss of concavity on one side of the shaft of the phalange this indicates ___.
6.
What is the minimum amount of wrist needed on a hand image?
7.
To place the thumb in a lateral position, have the patient ___ the ___ toward the hand.
8.
On a properly positioned oblique finger, there should be no ____ of the soft tissues.
9.
On a properly positioned finger, What is the minimum amount of distal metacarpal needed?
10.
This happens when the finger is not parallel to the IR
11.
What is the centering for a PA, oblique, and lateral thumb
12.
___ of the shafts of the metacarpals should appear equal on both sides
13.
An oblique hand requires a __ __ degrees of obliquity
14.
the proximal 3rd-5th ___ ___ should be slightly superimposed on an oblique hand image.
15.
if the MCP and IP joints are closed, this means that the fingers are __ ___ to the IR.
16.
On a properly positioned finger, What is the minimum amount of distal metacarpal needed?
17.
What is the centering for a PA, oblique, and lateral finger?
18.
The difference between the thumb and the other finger is that it only has ___ ______.
19.
One way to determine if the thumb is in a true lateral position is the relatively ___ ___ surfaces?