1.
What is the abbreviation for SILICON CONTROL RECTIFIER?
2.
The three pins on an SCR are the CATHODE, the ANODE, and the __________________ .
3.
The center pin on an SCR is called the _____________ .
4.
Once an SCR is 'turned on', it remains on until the _______________ is removed from the circuit.
5.
The GATE pin on the SCR is marked by the _________ .
6.
The metal tab with the hole in it is connected to the ______________ of the SCR.
7.
To shut off the current through the SCR, you have to disconnect the ________________ .
8.
Because the SCR is a ___________ , if you reverse the battery snap, the circuit will not conduct current.
9.
To 'trigger' the SCR, a ______________ voltage has to be applied to the GATE.
10.
An SCR is a "DIODE WITH A ____________________ ".
