1.
A metal that has a major alloy of Iron is considered..
2.
Pass electricity directly through a ferrous part
3.
Imaginary lines used to visualize magnetic fields
4.
Number of flux lines per cross-sectional area
5.
Iron loses its ferromagnetic properties when heated past what point?
6.
Force required to reduce flux density to near zero
7.
Ease with which a ferromagnetic material may be magnetized
8.
Ability of a material to RETAIN magnetism
9.
Magnetism remaining in a part when magnetizing force has been removed and reduced to near zero
10.
Electrical current effective for detecting ONLY surface discontinuities
11.
Electrical current for both surface and subsurface discontinuities
12.
Magnetic field use to detect longitudinal discontinuities
13.
Portable electromagnetic __________
14.
Curve that showcases the effects of magnetism on a ferrous part
15.
Indicator that can be used to detect if a part is magnetized
16.
The point where a ferromagnetic material has no increase in magnetic field strength
17.
Degree of difficulty with which magnetic flux is produced within the material
18.
Small magnetic regions within a ferromagnetic material
19.
Hand rule that shows using a CBC what electrical current and magnetic field is being used
20.
An accumulation of magnetic particles being held by a magnetic leakage field to the surface of the part
21.
Every part subjected to magnetism must be ___________
22.
Two ways to check for demagnetization using a field indicator or _______ meter
