1.
ANOTHER NAME FOR ENGINE BLOCK __________
2.
USED TO CONVERT THE UP AND DOWN MOTION OF THE PISTON INTO A ROTARY MOTION _____________
3.
ONE OF THE STROKES WHEN THE PISTON IS MOVING DOWNWARD AND FRESH AIR IS DRAWN INTO THE CYLINDER ____________
4.
ONE OF THE STROKES WHEN THE PISION IS MOVING UPWARDS AND COMPRESSING THE AIR IN THE CYLINDER ____________
5.
ONE OF THE STROKES WHEN THE PISTON IS PUSHED DOWNWARDS FROM THE IGNITION OF THE AIR/FUEL MIXTURE ___________
6.
ONE OF THE STROKES WHEN THE PISTON IS MOVING UPWARDS AND THE BURNT GASSES ARE PUSHED OUT OF THE CYLINDER__________
7.
USED TO CLOSE THE INTAKE AND EXHAUST VALVE _________
8.
USED TO OPEN THE INTAKE AND EXHAUST VALVE __________
9.
USED TO CREATE A SEAL BETWEEN THE PISTON AND THE CYLINDER WALLS _____________
10.
GIVES A WEAR SURFACE FOR THE CRANKSHAFT TO MOVE ON _________________
11.
USED TO CONNECT THE PISTON TO THE CRANKSHAFT _______ _____________
12.
FORMS A RESERVOIR AT THE BOTTOM OF THE ENGINE FOR THE OIL ______ _______
13.
EXHAUST DRIVEN COMPRESSOR THAT SUPPLIES PRESSURIZED INTAKE AIR _________
