1.
What type of tweezers should never be used to pick up components?
2.
What is the appropriate PPE to wear at all times when handling chemicals?
3.
It is ____ to dispose of waste solvents into the (water) sink drains
4.
If found in an operation it is necessary to remove and document.
5.
If epoxy is stored in a refrigerator or freezer: The container should remain at room temperature for a minimum of ________ minutes before using.
6.
End terminated devices, otherwise known as _______ , shall show clear evidence of epoxy attaching to the bond pads on the unit.
7.
Adhesive material that extends onto the top surface of the component or comes closer that .001 inch to any metallization that is not electrically connected is what?
8.
What is caused by smeared or excess epoxy and is rejectable?
9.
What residue if found on a bonding pad is rejectable?
10.
As epoxy is removed from the ___ you will record the date of when you removed it and the expiration date.
11.
Prior to curing epoxy, what should be verified per the oven process?
12.
At what point in the shift should epoxy in aluminum cups be discarded?
13.
An operator should never contact what area when picking up components?
14.
If epoxy is difficult to transfer from prob to substrate or hangs in strings it should be ______.
15.
______ and Cure Temperature is specified in the process.
16.
Before using the proper epoxy, operators must check to see if it is _____.
