1.
A conductive barrier against electromagnetic fields.
2.
Two or more conductors joined together.
3.
This wire is not commonly used in industrial shielded applications.
4.
This can render a splice useless.
5.
One of the five basic steps to rebuild a splice.
6.
A terminator for high voltage circuit conductors.
7.
A high potential test in which equipment insulation is subject to a voltage higher than its rating.
8.
This type of grounding system typically require an insulation level of 173%
9.
Heat shrink products use this cross linked type of tubing to shrink when heated.
10.
When air breaks down it creates this type of discharge.
11.
Strand shielding creates this between the conductor and insulation that compensates for air voids between materials.
12.
This color tape is supplied with cold shrink kits. Scotch tape #35.
13.
In high-pot testing this test is usually made at about 60% of the factory test voltage.
14.
One of the two common types of termination stress control.
15.
Simple test used to determine whether an installation meets a specific high voltage breakdown requirement.
16.
This stranding has the smallest overall diameter
