1.
WHILE CONCRETE IS APPLIED TO EMBEDDED FLOOR HEATING CABLES IT SHALL BE FASTENED IN PLACE BY THIS MEANS
2.
BASED ON NICKLE WITH CHROMIUM ADDED
3.
A CONTAINER SUCH AS A DRUM OR TANK
4.
ELECTRIC CABLE HEATING SYSTEMS ARE OFTEN CALLED THIS.
5.
CONSTANT WATTAGE HEATING CABLE USED IN LONG LINE APPLICATIONS
6.
NEC ARTICLE 426 COVERS THE REQUIREMENTS FOR ALL ____ OUTDOOR ELECTRIC DE-ICING AND SNOW MELTING EQUIPMENT
7.
BRANCH CIRCUIT AND OVERCURRENT DEVICES SUPPLYING ELECTRIC HEATING CABLES SHALL NOT BE LESS THAN 125% OF THE ______ HEATER LOAD
8.
SENSOR MUST BE LOCATED 3-5' FROM THIS TYPE OF SOURCE
9.
THE MINIMUM NUMBER OF CIRCUITS REQUIRED FOR A HEATING INSTALLATION IS DETERMINED BY DIVIDING THE TOTAL_______.
11.
ONE OF THE TWO TEMPERATURE MAINTENANCE CATAGORIES
12.
THIS TYPE OF HEAT CABLE CONSISTS OF A COILED RESISTOR HEATING ELEMENT WRAPPED AROUND 2 PARALLEL BUS WIRES
13.
THE NUMBER OF FEET USUALLY ADDED FOR EACH POWER CONNECTION
14.
TO VERIFY THAT THE HEATING CABLE HASN'T BEEN DAMAGED DURING SHIPPING TEST IT FOR_____
15.
NEC 427.22 REQUIRES THE USE OF THIS TYPE OF EQUIPMENT
